YANGDA

YD6-1600L Heavy Lift Hexacopter Frame

MSRP: £3,191.60
£2,393.50
(You save £798.10 )
Sku:
YD6-1600L
Weight:
3.20 KGS
Adding to cart… The item has been added

Product Overview

Introduction

YD6-1600L hexacopter frame is a multifunctional heavy-lift flight platform. Its one-time forming carbon fiber technology reduces weight while still keep the stiffness, which makes it stronger and lighter for long flight time.

Stable and reliable
YD6-1600L arm connector is using special compound material: industrial plastic with glass fiber. This compound material features high strength and flexibility, which can stand high-frequency vibration created by the motors in the air. Furthermore, with a glass fiber canopy, the GPS signal will not be blocked.

Easy for setup and maintenance
Frame arm of YD6-1600L is detachable, which will enable you to finish the drone setup in 5 minutes. Furthermore, if the arm is broken during a flight crash, you will just need to replace it with a new one, which will greatly save your maintenance cost and time.

Long flying time
Equipped with the 29inch propeller, T-Motor motors, 2 units 6S 32000mah HV lipo battery, the YD6-1600L frame is able to fly 61 minutes with 2KG payload, 47 minutes with 5KG payload.

Good for drone customization
YD6-1600L comes with big size center frame, which is able to accommodate more devices. So it becomes an ideal flight platform for your drone customization.

Difference between YD6-1600S and YD6-1600L frame
Compared to YD6-1600S frame, YD6-1600L frame has bigger center body, which will enable it to accommodate more electronic devices like various sensors, and bigger capacity batteries.

Specification

Wheelbase: 1600mm
Wingspan: 2350mm
Frame Weight: 3200 grams
Fuselage Height: 500mm
Landing Skid Width: 500mm
Motor Mount Diameter: 89.5mm
Motor Compatible: T-MOTOR U8 U10 Series
Max Propeller Size: 30 Inch
Battery Compatible: 2pcs 32000mAH lipo
Frame Material: Toray 3K Carbon Fiber

Your Purchase Includes

1 x YD6-1600L frame (No ESC,Motor and Propellers)
6 x Motor connector unit (For motor and ESC connection)
1 x Center board (For battery and electronic components installation)
1 x Bottom board (For payload installation,like gimbal)
1 x Double side tape (For battery fixing on center board)

Product Photos

1600l-new-1.jpg1600l-new-2.jpg1600l-new-3.jpg1600l-new-4.jpg1600l-new-5.jpg1600l-new-6.jpg1600l-new-7.jpg1600l-new-8.jpg1600l-new-9.jpg